Job Archives
Hi Everyone,
We’re sourcing for qualified candidates to fill the following positions:
Work Based: Kuala Lumpur.
Transport Assistant (Driver)
- Must have at least five (5) years’ experience working as Transport Assistant/Driver or similar position in any industry.
- Must have valid driving license.
- Must be able to speak and understand English.
- Must have at least five (5) years’ experience working as Account Assistant/Finance Support or similar position in Oil & Gas industry, and at least three (3) years’ experience working with SAP system.
- Must have at least Diploma in Accounting, Finance, Business Management or equivalent.
- Must be able to communicate and write in English.
- Have experience in Microsoft Office Suite.
- Must have at least five (5) years’ experience working as Admin Assistant or similar position in any industry.
- Must have at least Diploma in Business Management or equivalent.
- Must be able to communicate and write in English.
- Have experience in Microsoft Office Suite.
- Must have at least five (5) years’ experience working as similar position in any industry.
- Must have at least Diploma.
- Must be able to communicate and write in English.
- Must have at least five (5) years’ experience working as similar position in any industry.
- Must have at least Diploma.
- Must be able to communicate and write in English.
- Must have at least three (3) years’ experience working as similar position in any industry.
- Must have at least Diploma.
- Must be able to communicate and write in English.
- Must have at least three (3) years’ experience working as SSHE Warden/Security or similar position in any industry.
- Must be able to communicate and write in English.
- No previous criminal, drug and alcohol records.
- Must have at least three (3) years’ experience working as Receptionist or similar position in any industry.
- Must have at least SPM certification.
- Must be able to communicate and write in English.
- Have experience in Microsoft Office Suite including MS Outlook.
Hi Everyone,
We’re sourcing for General Inspector
REQUIREMENTS:-
- Diploma in Mechanical Engineering or equivalent or vocational certificate in relevant disciplines.
- Min. of 15 years of experience, with certified and valid certificate:-
- Welding with qualification of CSWIP SWI 3.2/AWS SCWI/PCN SWI L3.
- NDT (RI) with qualification of PCN Level 2/CSWIP 3.4/ISO9712 Level 2.
- NDT (UT) with qualification of PCN Level 2/CSWIP Level 2/ISO 9712 Level 2.
- Blasting & Painting with qualification of NACE Level 2/IMM Level 2/SSPC PCI Level 2/FROSIO Level 3.
Hi Connections,
We’re sourcing for QAQC Inspector
Zone: America, Asia, Europe
REQUIREMENTS:-
- Qualification from the Technical & Vocational Certificate awarded by Ministry of Education or equivalent, or Diploma in any Engineering related discipline.
- Demonstrated a min. of six (6) Years of work experience related to drilling, completion or well intervention scope, with min. of 3 years of work experience in inspecting drilling, completion, or well intervention equipment.
- Possess CSWIP or PCN or ASNT Certified Magnetic Particle Testing Level 2 with relevant experience and knowledge in reviewing MT reports and witness the Magnetic Particle Testing.
- Possess CSWIP or PCN or ASNT Certified Penetrant Testing Level 2 with relevant experience and knowledge in reviewing PT reports and witness the Dye Penetrant Testing.
Hi Connections,
We’re sourcing for Supply Chain – Vendor Management Analyst
Work Based: Kuching, Sarawak.
REQUIREMENTS:-
- Bachelor’s degree in law, supply chain management, Business Administration or any other degree.
- Proficiency in MS Office, particularly Excel and other data analysis tools.
- Legal knowledge
- Strong analytical & interpersonal skills and attention to detail.
- Clear and timely communication, both written and verbal.
- Maintain confidentiality and adhere to company policies.
- Ability to foster a collaborative team environment.
- Agility to sustain and deliver to meet a tight timeline.
- Min. of two (2) to three (3) years of working experience in any sector.
- Preferably experience in supplier management, procurement, or supply chain analytics.
Hi Everyone,
We’re sourcing for Commissioning Engineer – Mechanical Static
Work Based: Kuala Lumpur.
REQUIREMENTS:-
- Bachelor of Engineering in Chemical/Mechanical or equivalent with min. 8-year hands-on-the-job experience in Oil & Gas facilities and 4-year experience project commissioning in Mechanical systems.
- Effective communication, interpersonal, and leadership/influencing skills.
- Computer literate and skilled user of MS Office, familiar with Project Completion System.
- Having hands-on-the-job working experience Process & Mechanical system commissioning with for wellhead platform, compression project and any onshore oil & gas related facility.
- Familiar in pressure testing, vessel entry final closed-up, lifting system, isolation plan, prepare testing check sheet/ Commissioning test plan & procedure.
- Shall be familiar with piping system pre-commissioning works, e.g. flushing/cleaning, hydro testing, P&ID line walk, reinstatement leak test, etc. Shall be able to prepare hydro test and reinstatement leak test procedures/packages and spading/isolation plans and have hands on experience in leading reinstatement leak test works, experience in using Nitrogen/ Helium method is preferred.
- Shall have hands on pre-commissioning and commissioning experience with static equipment (tanks/pressure vessels, heat exchangers, air/gas coolers, heat recovery systems, material handling equipment, etc.), HVAC systems, material handling equipment and additional experience in rotating equipment (pumps, turbine compressors, turbine/ diesel generators, instrument air compressors and dryers, chemical injection etc.) would be an advantage.
- Able to work on PEFS, UEFS, Isometric and GA drawings.
- Must have min. four (4) year experience working related with Mechanical pre-commissioning, commissioning and system handover.
- Shall have Steam Boiler Engineer Grade 1 and 2 with Department of Occupational Safety and Health (DOSH) recognized Certifications.
Hi Everyone,
We’re sourcing for Senior Advisor, Legal
Work Based: Kuala Lumpur.
REQUIREMENTS:-
- 10 years experience (post admission to the Malaysian Bar).
- 8 years experience in oil & gas.
- Must be analytical and able to work independently.
- A team player, possess communications and leadership skills.
- Possess good negotiation skills.
- Fluent in oral & written English.
- Experienced in oil & gas industry.
- Familiar with the Malaysian upstream oil & gas industry including PSC, JOA, and project agreements.
- Proven teamwork, communications, and leadership skills.
Hi Everyone,
We’re sourcing for LGRC Support Officer
REQUIREMENTS:-
- Diploma in Business Administration, Legal Studies, Corporate Governance, or related field.
- Preferred Business Administration, Corporate Governance, Compliance, or related discipline.
Hi Everyone,
We’re sourcing for qualified candidates to fill the following positions:
Site Survey Geophysical QC / HSE Monitoring
- Conduct on-site supervision of field operation and data quality control for analogue and digital 2DHR site/seabed survey and HSE monitoring.
- Conduct on-site supervision of field operation and data quality control for seabed survey, deep-water projects, and engineering installation projects.
- Conduct on premise geographical information system (GIS) application development for geographical and positioning data visualization and data analytic using expertise in ArcGIS Pro, ArcGIS Online, Geodatabases and Web development: Javascript/HTML5/Phython. Expertise in Machine Learning(ML) and Artificial Intelligence (AI) projects development.
- Conduct on-site supervision of field operation and data quality control for onshore land and engineering installation projects including Remote Piloted Aircraft System survey, Underground Imaging survey, Laser Scanning and 360 Photogrammetry etc.
- Degree in Geophysics or relevant disciplines,
- Accumulated at least eight (8) years professional experience in Geohazards assessment and operational support to well delivery and facilities placement.
- Must have licensed geohazards assessment software e.g. CODA or Petrel or Kingdom or Wadugs or equivalent.
- Degree in Geology or Petroleum Geology or relevant disciplines.
- Accumulated at least seven (7) years professional experience as wellsite geologist supporting drilling operations.
Hi Connections,
We’re sourcing for qualified candidates to fill the following positions:
Seismic Acquisition QC / HSE Monitoring
- Conduct on-site supervision and quality control of field operation for Seismic Surveys (2D/3D, 4D Time-Lapse and Ocean Bottom Cable) and HSE monitoring.
- Conduct on-site supervision and quality control of seismic navigation, positioning, surveying and navigation post-processing QC for 2D/3D, 4D Time-Lapse and Ocean Bottom Cable/Node surveys, and HSE monitoring.
- Conduct on premise pre-survey planning and daily operation of marine seismic surveys to ensure achieving the survey objectivies.
- Conduct on premise/office-based pre-survey planning and independent survey design review, daily operation of marine seismic survey, survey optimization, 4D repeatability study etc., to ensure optimum survey parameters to achieve the survey objectives.
- Conduct on-site supervision and quality control of field ROV operation for Ocean Bottom Node (OBN) seismic survey.
- Conduct independent technical audit on seismic instrumentation, recording system, energy sources and receivers; equipment configuration, layout and methods, procedures used by the seismic contractor.
- For offshore operations and to act immediately to protect species of concern should they enter an exclusion zone prior to and sometimes during operations. MFOs will advise personnel onboard to delay or shut down operations until the animals are at a safe distance and also to record behaviour and sightings at other times. Monitoring and management measures may be set out by a regulatory authority or follow industry best practice.
- Diploma/Degree in Marine Biology or relevant disciplines.
- Attended PAM training.
- Accumulated at least twenty (20) weeks of PAM experience in Oil & Gas Industry.
Hi Connections,
We’re sourcing for QA/QC Inspector
REQUIREMENTS:-
- Min. of 8 years working experience particularly QA/QC Surveillance for Oil & Gas Drilling and Completion Equipment (with at least 5 years of QA/QC experience in Drilling and Completion Equipment system).
- Familiar with the latest edition of the international codes, industry standards, industry specifications and COMPANY standards.
- Familiar with relevant codes and standards (e.g., ASME, API, ISO, AWS, ASNT) for NDT and Welding inspection.
- Familiar on inspecting directional drilling tools.
- Have a working knowledge of and general experience involving inspection and evaluation of Connections with API and thread forms to include machine shop repair, re-manufacture and gauging of these connections.
- Required to have a working knowledge of and general experience involving visual inspection and evaluation of Premium connections (but not limited to e.g. JFE Fox, JFE Bear, Vam, Hydril) to include machine shop processes associated with threading, gauge calibration, and final gauging inspection for acceptance.
- Have knowledge/experience in Drill Stem Inspection Standard (DS-1).
Hi Connections,
We’re sourcing for Sr. Inspection Engineer
Work Based: Shanghai, China.
REQUIREMENTS:-
- Degree in Mechanical Engineering or equivalent.
- 12 years or more experience in related discipline.
- Professional Qualification :
- Welding : CSWIP Level 3.1/AWS CWI/PCN WI Level II.
Hi Everyone,
We’re sourcing for qualified candidates to fill the following positions:
General Inspector
- Diploma in Mechanical Engineering or equivalent or vocational certificate in relevant disciplines.
- 15 years or more experience in related disciplines.
- Profesional Qualification:
- Welding – Either one (1) of the certificates (Note: CSWIP 3.2.2 qualified for RI requirement)
- CSWIP SWI 3.2
- AWS SCWI
- PCN SWI L3
- NDT (RI & UT) Radiographic Interpreter (RI) – Either one (1) of the certificates
- PCN Level 2
- CSWIP 3.4
- ISO9712 Level 2
- NDT (RI & UT) Ultrasonic Testing (UT)
- PCN Level 2
- CSWIP Level 2
- ISO9712 Level 2
- Blasting & Painting – Either one (1) of the certificates
- NACE Level 2
- IMM Level 2
- SSPC PCI Level 2
- FROSIO Level 3
- Diploma in Electrical Engineering or equivalent or vocational certificate issued by recognized institution.
- 8 years or more experience in Electrical and Instrument disciplines.
- Professional Qualification – IECEx parts: Ex001, Ex007, Ex008
Hi Everyone,
We’re sourcing for qualified candidates to fill the following positions:
Lead Operations Geologist
- Shall have 7 – 10 years of working experience as Operations Geologist and/or Wellsite Geologist.
- 3 - 5 years’ experience as Operations Geologist supervising operations in offshore Malaysia (exploration / development) of which all must have occurred within the past 10 years.
- Experience as Operations / Wellsite Geologist in HPHT, deepwater drilling, depleted, clastic and carbonate setting.
- Experience in supervision and quality control (QC) of wireline: formation pressure testing/sampling operations, sidewall core, seismic etc.
- Have experience in supervising LWD, formation pressure testing while drilling (FPWD) program in high angle well and/or horizontal wells.
- Experienced working/involved with managing contracts (i.e. Mudlogging, Wireline etc.)
- University Bachelor’s Degree in Geology, Geosciences or Earth Sciences equivalent.
- Registered with the Malaysian Board of Geologists.
- 7-10 years’ experience in Oil & Gas industry.
- 3-5 years as Wellsite Geologist experience of which all must have occurred within the past ten (10) years.
- Candidates must have experience in sitting offshore Malaysia (exploration/development).
- Experience as Wellsite/Operations Geologist in HPHT, deepwater drilling, depleted, clastic and carbonate setting.
- First-hand experience in all Wellsite Geologist role, including but not limited to drilling, coring, wireline logging for formation pressure testing/sampling operations, sidewall core, seismic etc., supervising LWD, formation pressure testing while drilling in reservoirs in high angle well / horizontal wells.
- Must be familiar and able to work with Geologic software.
- University Bachelor’s Degree in Geology, Geosciences or Earth Sciences equivalent
- Registered with the Malaysian Board of Geologists.
Hi Everyone,
We’re sourcing for qualified candidates to fill the following positions:
Rov Supervisor
- A bachelor’s degree in an engineering discipline, marine sciences, or related field is highly beneficial.
- Comprehensive training in ROV operations; certification from recognized institutions such as the International Marine Contractors Association (IMCA) is advantageous.
- Several years of experience in ROV operations, with progressive responsibility, including a track record of successful supervisory roles.
- Knowledge of electronic, hydraulic, and mechanical systems used in ROV technology.
- Strong problem-solving skills, leadership capabilities, and the ability to make decisions under pressure.
- Excellent communication and interpersonal skills to effectively manage and collaborate with diverse teams.
- Proven work experience as an ROV Pilot Technician.
- Strong knowledge of hydraulic, electronic, and mechanical systems.
- Excellent problem-solving and technical skills.
- Ability to work under pressure and make quick decisions.
- Excellent communication skills.
- Ability to work in a team environment.
- Certification as an ROV Pilot Technician is preferred.
- Proven work experience as an ROV Pilot Technician.
- Strong knowledge of hydraulic, electronic, and mechanical systems.
- Excellent problem-solving and technical skills.
- Ability to work under pressure and make quick decisions.
- Excellent communication skills.
- Ability to work in a team environment.
- Certification as an ROV Pilot Technician is preferred.
- Commercial Surface Supplied Air Diver Certification from a recognized diving school.
- Valid offshore and safety certifications: BOSIET / FOET, HUET & Offshore Medical Certificate.
- First Aid and Oxygen Administration certifications (preferred).
- IMCA-recognized certification or ADCI equivalent.
Hi Everyone,
We’re sourcing for Petrophysicist
REQUIREMENTS:-
- 10 years’ total experience as Petrophysicist in oil & gas industry which min. 3 years (out of the 10 years) must be within the past 10 years.
- Experience in clastic and carbonate reservoirs.
- Experience in petrophysical evaluation of thin-bedded reservoirs.
- Experience with various logging types (general logs and sophisticated logs such as NMR, dielectric, image log, RT scanner), and experience in providing expert recommendations on the suitable log to meet data acquisition objective.
- Experience on logging, pressure test and fluid sampling operation and experience in supervising/monitoring operation.
- Experience on petrophysical evaluation, support and guidance to the real time drilling campaign and post drilling campaign.
- Familiar with subsurface in the offshore Malaysia area.
- Experience with log interpretation software.